Techcon – Disposable Pinch Tube Valves

Techcon TS1212 Disposable Pinch Tube Valve

The Pinch Tube Valves provide a high degree of control for continuous or micro shot applications of low to semi-viscous fluids whilst utilizing a Disposable Material Path (DMP).

Request a Quote

Product Description

The TS1212 semi-automatic version relies on a dispensing controller sending a pre-programmed air signal that opens the valve and allows fluid to flow. Once the dispense cycle is complete, the air signal stops and the internal spring forces the shut-off piston to “pinch” the disposable feed path, preventing further fluid flow. The TS1201 is a hand-hand version that works on a similar principle – the operator takes the place of the dispensing controller by pressing and releasing the finger lever to start/stop the dispense cycle. Both versions have a built in flow rate adjustment

The only part of the valve making contact with the fluid being dispensed is the disposable pinch tube assembly making the TS1212 and TS1201 ideally suited to dispensing 2-part and CA (Cyanoacrylate) materials.



  • Disposable feed path – no cleaning required
  • Optional black feed paths for UV fluid applications
  • Optional polyurethane feed paths available
  • Simple to operate
  • Compact size and weight


  TS1201 TS1212
Size W x H: 1.44” x 4.81” ( 37mm x 122mm) 3.3” NOM x 2.44” (83mmx62mm)
Weight: 0.08lb (36g) 0.18lb (82g)
Fluid Inlet: Female Luer Lock Female Luer lock
Fluid Outlet: Male Luer Lock Male Luer lock
Mounting: Hand held 1/4-20UNC-2B
Maximum Fluid Pressure: 60psi (4.1bar) 60psi (4.1bar)
Wetted parts: Polyethylene, optional polyurethane Polyethylene, optional polyurethane
Cycle Rate: Exceeds 400 cycles/minute
Material Viscosity Range: 1 – 45,000cps 1 – 45,000cps
Warranty: 1 year 1 year